고중량물을 산꼭대기로 옮겨주는 케이블카 운반시스템 [VIDEO] Need to Get Some Heavy Equipment Up a Mountain? Try a Cable Car System

[VIDEO] Need to Get Some Heavy Equipment Up a Mountain? Try a Cable Car System

February 2, 2021 Shane Hedmond

 

Remote jobsites with difficult terrain pose some substantial logistical challenges when it comes to getting equipment and materials on site.  I’ve seen several different methods used in the past, such as heavy equipment carrying blimps, cargo planes, helicopters, and the Fat Truck, but I recently came across a new method: a cable car.

 

 

고중량물을 산꼭대기로 옮겨주는 케이블카 운반시스템

 

  어려운 지형을 가진 원격 작업현장은 현장에서 장비와 재료를 구득하는 데 있어 상당한 물류상의 문제를 안고 있습니다. 저는 과거에 사용된 몇 가지 다른 방법들을 보았다. 예를 들어, 중장비, 화물기, 헬리콥터, 그리고 뚱뚱한 트럭과 같은 것들. 하지만 최근에 저는 새로운 방법인 케이블카 방법을 찾았다.

 


 

스키 리프트와 거의 흡사하게, 케이블카 시스템은 언덕을 따라 움직인다. 하지만 이 괴물들은 스노우보드를 가지고 몇 명의 사람들을 끌고 가는 대신, 재료와 심지어 무거운 장비까지 세계에서 가장 힘든 직업 장소로 옮기고 있다.

 

엄밀히 말해 '고중량 케이블 크레인 시스템'으로 불리는 LSC 케이블 크레인스는 최근 유튜브에 두세 개의 동영상을 공유하며 오스트리아 산중턱의 수력발전소 프로젝트에 자신들의 운반시스템을 과시하고 있다.

 

케이블 시스템이 고정돼 있는 타워를 설치하기 위해서는 접근하기 쉬운 곳에는 이동식 크레인을, 어려운 곳에는 헬리콥터를 이용해야 했다. 이 프로젝트의 케이블은 직경이 2.36인치(60mm)이고 상단과 하단 스테이션의 장력은 각각 110톤(미터톤으로 추정하지만 분명하지 않다)이다.

 

   

이 시스템은 상단 기지국에 있는 두 개의 전기 유압 동력 장치에 의해 구동되며, 각 장치는 400kW의 출력을 가지고 있다. 최대 부하에서 케이블은 부분 부하로 재료와 장비를 시속 약 9mph(14.4km), 13.4mph(24.4km)의 속도로 끌어 당길 수 있다.

 

 

시스템이 어떻게 구성되는지 보려면 첫 번째 영상을 확인하세요. 두 번째 영상은 오스트리아의 또 다른 산중턱 프로젝트에서 케이블 크레인 시스템이 작동하는 모습을 보여준다. 두 영상 모두 LCS 케이블 크레인스가 제작했다.

 

황기철 콘페이퍼 에디터

Ki Chul Hwang Conpaper editor 


 

via youtube

edited by kcontents

 

Much like a ski lift, these cable car systems run up a hill side, but instead of hauling up a couple of humans with some snowboards, these monsters are hauling materials and even heavy equipment to some of the world’s toughest jobsites.

 

Technically called a “heavy duty cable crane system,” LSC Cable Cranes has shared a couple of videos on Youtube recently, showing off their systems on a hydro power plant projects in the mountainsides of Austria. 

 

 

via youtube

 

 

   

 

 

edited by kcontents

 

In order to install the towers that the hold the cable system, the team had to use mobile cranes for the more easily accessible areas and helicopters for the tougher areas. The cables on this specific project have a diameter of 2.36 inches (60mm) with a tension on the top and bottom stations of 110 tons each (I’m assuming that’s metric tons, but it’s unclear).

 

The system is powered by two electro-hydraulic power units at the top base station, each having 400 kW power output. With a full load, the cables can pull materials and equipment at a speed of nearly 9mph and 13.4mph with a partial load.

 

To see how the system is constructed, check out the fist video.  The second video shows the cable crane system in action on another mountainside project in Austria. Both videos are by LCS Cable Cranes.

 

https://www.constructionjunkie.com/blog/2021/2/2/video-need-to-get-some-heavy-equipment-up-a-mountain-try-a-cable-car-system

 

 

   

 

 

 

kcontents

댓글()